Introducing: new Q8 Brake Fluids

Kirsten Lykke Bach 20 April 2018 Automotive, Passenger Cars
Brake fluid

Q8Oils launches two new Brake Fluid products meeting the requirements for DOT 4+ and DOT 4 LV.

  • Q8 Brake Fluid DOT 4+
  • Q8 Brake Fluid DOT 4 LV

Q8 Brake Fluid DOT 4+

Q8 Brake Fluid DOT 4+ offers a higher dry and wet boiling point at 260 °C (dry boiling point) and 165 °C (wet boiling point).  Q8 Brake Fluid DOT 4+ may be used where a non-petroleum type fluid is required and which is described by the following performance quality specifications and meet the requirements of the latest issue US FMVSS DOT4/DOT3, SAE J1703/1704 and ISO 4925 Class 3 & 4 Specifications, JIS K 2233 Class 4.

Benefits

  • Higher dry and wet boiling point offers increased safety of the brake while driving
  • Quick brake response at both high as low temperatures
  • Can be used as a universal brake fluid for cars, trucks and motorcycles that require brake fluids that meet the DOT 3 or DOT 4 requirements
  • Protects the braking and coupling hydraulics against deposits and corrosion
  • Compatible with system rubber seals
  • Limited wear due to good lubricity
  • Miscible with other non-petroleum brake fluids
Q8 Brake fluid DOT 4+
Q8 Brake fluid DOT 4+

Q8 Brake Fluid DOT 4 LV

Q8 Brake Fluid DOT 4 LV is specially developed for Electronic ESP (Electronic Stability Program) and DSC (Dynamic Stability Control)  systems and for conventional brake systems using Glycol Ether Based Brake Fluids.  It is characterized by an extreme low temperature viscosity and can operate effectively over a wide temperature range and gives a faster responding time even at very low temperatures.

Q8 Brake Fluid DOT 4 LV may be used where a non-petroleum type fluid is required and which is described by the following performance quality specifications and meet the requirements for the US FMVSS 116 DOT 4/DOT 3 SAE J 1703 & 1704 and ISO 4925 Class 3, 4 & 6, JIS K 2233 Class 6, Ford WSS-M6C65-A2V 501.14

Q8 Brake fluid DOT 4LV
Q8 Brake fluid DOT 4LV

Benefits

  • This Low Viscosity brake fluid offer highest ISO CLASS 6 level standards and guarantees fast brake response even at extremely low cold temperatures
  • Quick brake respons at high and low temperatures
  • Can be used for cars, trucks and motorcycles that require brake fluids that meet the DOT 4 requirements.
  • Protects the braking and coupling hydraulics against deposits and corrosion
  • Limited wear due to good lubricity
  • For modern cars equipped with ABS (Anti-lock Braking System) and ESP (Electronic Stability Program).
  • Exceeds the minimum DOT 4 requirements and can also be used in all traditional DOT 4 applications
  • Compatible with system rubber seals
  • Miscible with other non-petroleum brake fluids

Brake fluid is hygroscopic and should therefore  be kept in closed containers and be replaced at the manufacturers recommended interval. For the same reason, Q8Oils has chosen a metal can (in 250ML and 1L) to prevent diffusion of water.

From our expert Kirsten Lykke Bach

Ask Suggest a topic