The increasingly stringent emission regulations and fuel-economy demands have forced engine manufacturers to downsize engines while improving their power and torque. The downside of today’s smaller engines with higher power density is their risk to abnormal disruptive combustion, such as knocking and a new phenomenon called low speed pre-ignition (LSPI).
The formation of varnish is a common problem for turbine operators. Varnish is difficult to remove and is seen as a silent machine killer that gradually deteriorates the performance of installations. The choice of the right turbine oil is the most efficient way to fight varnish formation. To understand which turbine oils can prevent varnishing, you must understand the characteristics of varnish and how it is formed.
Emission regulations are an hot item for the automotive industry. To meet the latest Euro VI regulations, truck manufacturers integrate an after treatment device (ATD) in the engine to limit the exhaust of undesired pollutants.
Q8Oils is proud to announce the introduction of a new Top Tier Universal Tractor Transmission Oil (UTTO), Q8 T 2300 CVT 15W-40, for Tractor Continuous Variable Transmissions (CVT).
Many drivers prefer a manual transmission system over an automatic transmissions system in their vehicle. And yet an automatic gearbox has a lot of advantages. In this article we list up the different automatic transmission technologies and compare them in terms of fuel efficiency, production cost and driving comfort.
Q8Oils has succeeded to eliminate the undesired side effects of gas engine oils with a high sulphated ash content. The Q8 Mahler G8 gas engine oil combines a 0,8 % sulphated ash content with a low deposit tendency, keeping engine parts clean.
Product Applications LUBricants, the technical support department of Q8Oils, has some important announcements to make. Not only has Joris van der List taken over from the recently retired PALUB manager Cees Sonneveldt, but also a new specialist recently joined the team in order to enhance our expert support.
The aluminum wire drawing emulsion as like copper should be filtered effectively, this promotes clean running by removal of abrasive and reactive fines from the system. In aluminum emulsions it is best to use two systems, a centrifuge and also a paper filtration. A third system of a vacuum filtration could also be considered to remove the lightweight particles.
There is a rising awareness of the importance of using eco-friendly lubricants, particularly in industries in ecologically-sensitive areas like forestry, agriculture, waterways, marine, mining, etc.
The use of soluble oil emulsions for aluminium drawing is not a new application, however with newer types of additive and the performance that they provide, substantial benefits can be provided to the drawing company by using emulsions over drawing oils. Emulsions can be used for both EC and Alloys across all wire sizes from rod to super fine applications.
Do not hesitate to participate again with a new code!
